The coke combustion rate in an iron ore sintering process is one of the most important determining factors of quality and productivity. Biomass carbon material is considered to be a coke substitute with a lower CO2 emission in the sintering process. The purpose of this study was to investigate the combustion rate of a biomass carbon material and to use a sintering simulation model to calculate ...
She, J.; Wang, C. An intelligent integrated optimization system for the proportioning of iron ore in a sintering process. J. Process Control. 2014, 24, 182202. [Google Scholar] Ramos, ; Kasai, E. Numerical Simulation Model of the Iron Ore Sintering Process Directly Describing the Agglomeration Phenomenon of Granules in the Packed Bed.
The quality control process for sintered ore is cumbersome and time and moneyconsuming. When the assay results come out and the ratios are found to be faulty, the ratios cannot be changed in time, which will produce sintered ore of substandard quality, resulting in a waste of resources and environmental pollution. For the problem of lagging sinter detection results, Long ShortTerm Memory ...
Sintering emissions and their mitigation technologies. L. Lu, ... X. Li, in Iron Ore, 2015. Key gaseous emissions from sinter plants. Iron ore sintering is a material preparation process employed worldwide in the production of iron and steel. According to statistical data on pollution, sintering plants rank second in terms of toxic emissions, after the incineration of municipal solid ...
The CaO and MgO slag components do not coexist with iron ores and are added separately; therefore, CaO (such as limestone) and MgO (such as serpentine or dolomite) are mixed with iron ore fines as the sinter raw mix for the sintering process. The ultrafine iron ore reacts with the fluxes and forms a bonding matrix (silicoferrite of calcium and ...
An efficient sintering process was proposed based on the autocatalytic denitrification of the sintered ore. The catalytic denitrification of sintered ore, the effect of doublelayer ignition sintering process on the emission reduction in nitrogen oxides, and the impact on the quality of sintered ore were studied. The results showed that the catalyzed reduction of NO with sinter ore as a ...
In iron making process, sintering of iron ore fines is an integral step to utilize not only the ore fines but also to introduce a part of flux (limestone and dolomite) along with the sinter in blast furnace burden. In this way, the productivity of the furnace considerably improves.
The iron ore sintering process is the process of mixing powdered iron ore, fuels, fluxes and recycling materials for the sintering process according to certain composition, mixing with water and igniting to sinter the raw materials into blocks in an incomplete melting state.
Mineralization testing process included ore matching, agglomeration, roasting and mineralogical analysis. Iron ores and fluxes (dolomite, limestone, and quicklime) were mixed to a feed, which then was used to produce sinter with SiO 2 %, basicity (CaO/SiO 2) and MgO %, the proportions of each material were shown in Table principle of ore matching for adhesion layer was ...
The sintering process can be defined as a thermal agglomeration process that is applied to a mixture of iron ore fines, recycled ironmaking products, fluxes, slagforming agents, and solid fuel (coke) with the objective of obtaining a product with the suitable characteristics (thermal, mechanical, physical, and chemical) to be fed to the blast furnace.
Limonite (brown iron ore) used as a raw material for sintering is inexpensive, but problems include the fact that this ore combines strongly with water and has a coarse particle size. These properties have a serious impact on productivity in the sintering process (Lu and Ishiyama 2016). By solving these problems, this device makes it possible ...
The process of sintering is basically a pretreatment process step during iron making for the production of the charge material called sinter for the blast furnace from iron ore fines and also from metallurgical wastes (collected dusts, sludge and mill scale etc.). The sintering technology was originally developed for the purpose of utilizing ...
The iron and steel industry has made an important contribution to China's economic development, and sinter accounts for 7080% of the blast furnace feed charge. However, the average grade of domestic iron ore is low, and imported iron ore is easily affected by transportation and price. The intelligent ore blending model with an intelligent algorithm as the core is studied.
Raw material. Iron ore blending, fuels, and fluxes (including dolomite, limestone, and quicklime) were utilized to produce sinter with total Fe (TFe) %, SiO 2 %, basicity (R = CaO/SiO 2), and MgO %.The chemical compositions of raw materials and their mass fractions are given in Table proximate analysis of coke breeze and chemical composition of its ash are shown in Table 2.
Experimental Materials. As shown in Group 1 of Table 1, the experimental raw materials were from a steel sintering workshop in Tangshan, the basicity of the sintering mixture was, the content of MgO was %, the Al 2 O 3 content was %, and more than 80% the fuel particle size is larger than 3 mm.
Sintering raw materials include iron ore powder (rich ore powder, concentrate powder), flux (limestone, dolomite, quicklime, etc.), fuel (coke powder and anthracite), additives (roll scale and some recycled materials), return ore in sintering process, and return ore below ironmaking trough. Process Flow
The iron ore powder used in the experiments was obtained from the raw material site of a steel company in southwest China. For B 2 O 3 an analytical reagent (≥98%) was used. The chemical composition of the raw materials is reported in Table 1 and Table 2. The raw materials are mixed powder (HVTM) composed of hematite powder and vanadium ...
Sintering is a process where a mixture of ore, flux and coke is agglomerated (agglomerated) in the sinter plant to produce suitable sintered products in terms of composition, quality and ...
When switching to sinter by using combined fuel, the blast furnace productivity increases by 1014%, and the specific fuel consumption in coke per unit of iron made decreases by 8%. Sinterediron ore has been the main raw material type for blast furnaces, with its share in ironmaking being 6070% [ 1 ]. This production will continue for a ...
2 Citations Abstract The raw materials for an integrated steelworks can be classified into four categories, which are iron ores, fluxes, fuels, and reverts. The characteristics of these raw materials strongly affect the metallurgical properties of iron ore sinter and sinter plant performance.
Sinter is created by mixing iron ore concentrate with several additives such as limestone and silica to control the chemistry and then igniting it at 1200°C in a continuous beltfed furnace. As noted in this EPA document: The sintering process converts finesized raw materials, including iron ore, coke breeze, limestone, mill scale, and flue ...
The raw materials used are five kinds of iron ores and quicklime. Table 1 shows different iron ores' size distribution and bulk density (Zhou et al., 2020a).The five iron ores used in this study came from Australia and Brazil and had a wide size distribution ranging from 0 to 10 mm. Table 2 shows the chemical composition of each raw material. The iron ore samples were dried in an oven at 105 ...
Sinter is the primary feed material for making iron in a blast furnace. Sinter is created by mixing iron ore concentrate with several additives such as limestone and silica to control the chemistry and then igniting it at 1200°C in a continuous beltfed furnace. Sinter feed composition control is important because the various sinter feed ...
Sinter Plants, that produce iron ore sinter, are important units in an integrated steel plant. They face several operational challenges due to frequent changes in input raw materials, the inability to instrument key equipment in the plant, and the absence of realtime sinter quality measurement. To address these challenges, Virtual Sinter®, a digital twin of the integrated sinter plant is ...
Iron ore sintering was a hightemperature process that preparing lump burden for further ironmaking. During this process, iron ore fines, recycled ironbearing materials, fluxes, and solid fuel including coke breeze, anthracite, etc., were thoroughly mixed and then agglomerated into finished sinter under 1300 °C provided by the combustion of ...
In actual sinter production, batching is a complex metallurgical and mathematical problem. Aiming at the problem of the precising batching of iron ore in the process of sintering batching, an automatic batching algorithm based on a Cartesian product to batch sinter was proposed for the first time. When the algorithm is applied to the sintering batching process, a complete batching scheme can ...
ABSTRACT. Sintering is an agglomeration process that fuses iron ore fines, fluxes, recycled products, slagforming elements and coke. The purpose of sintering is to obtain a product with suitable composition, quality and granulometry to be used as burden material in the blast furnace.
Meanwhile, an iron ore sinter is a crucial material for the ironmaking process, and its chemical, physical, and metallurgical properties significantly impact the blast furnace (BF) performance. In turn, the main materials used for a sinter are iron ore fines, and their chemical compositions play a critical role in the sintering process. Due to ...
© DZCrusher - كل الحقوق محفوظة
